Is Auto-Cad a good software to learn if I am the type of person who love to invent? - blueprint sand rail
I think the learning AutoCAD. It is a bit difficult to learn, a book for beginners is about 1,500 pages. I have not even told of the books and references. Anyway, you can learn if they AutoCad proved useful.
There For AutoCAD users, do you think is a good program to see if I have the kind of person that I adjust something and / or invent something you like?
For example, I would like to build an office, but they lack the ability of a craftsman. You do not want to buy into the office because I do not like the drawings. I want to use AutoCAD to design a model that is then transfer to a company to help me cut, sand and paint are all of the materials for me, and then all you have to do is build together.
It AutoCad help me? If I were a misuse, then it is for AutoCAD? Please help.
Tuesday, December 15, 2009
Blueprint Sand Rail Is Auto-Cad A Good Software To Learn If I Am The Type Of Person Who Love To Invent?
Subscribe to:
Post Comments (Atom)
12 comments:
I have AutoCad and professionally in my humble opinion, is a bit high price under the heavy workload. Moreover, even if it is done in AutoCAD drawings, the construction company offices often require drawings in the standard "industry" formats so that you can understand the workers who are drawing with the minimum number of calls, declarations, etc.
I recommend a beginners course in Autocad in a community college in your area. In this way you can with the basics of CAD creation (and the development of standards in general) quickly, you can receive live answers to any questions a person, and you will be able to provide information on Writing a low cost of other programs of the teacher.
-------
Autocad (and the CAD software in general) are much better than the old manual paper and pencil, "" drawing board "methods (been there, etc.), as a time saving, especially for highly detailed or large (buildings, cars) projects. But even with the CAO, you should always be able to transfer the necessary information have developed in the workshop to your orders - we recommend the course of a real person must be followed by an identifier for the necessity of the real world.
I have AutoCad and professionally in my humble opinion, is a bit high price under the heavy workload. Moreover, even if it is done in AutoCAD drawings, the construction company offices often require drawings in the standard "industry" formats so that you can understand the workers who are drawing with the minimum number of calls, declarations, etc.
I recommend a beginners course in Autocad in a community college in your area. In this way you can with the basics of CAD creation (and the development of standards in general) quickly, you can receive live answers to any questions a person, and you will be able to provide information on Writing a low cost of other programs of the teacher.
-------
Autocad (and the CAD software in general) are much better than the old manual paper and pencil, "" drawing board "methods (been there, etc.), as a time saving, especially for highly detailed or large (buildings, cars) projects. But even with the CAO, you should always be able to transfer the necessary information have developed in the workshop to your orders - we recommend the course of a real person must be followed by an identifier for the necessity of the real world.
I have AutoCad and professionally in my humble opinion, is a bit high price under the heavy workload. Moreover, even if it is done in AutoCAD drawings, the construction company offices often require drawings in the standard "industry" formats so that you can understand the workers who are drawing with the minimum number of calls, declarations, etc.
I recommend a beginners course in Autocad in a community college in your area. In this way you can with the basics of CAD creation (and the development of standards in general) quickly, you can receive live answers to any questions a person, and you will be able to provide information on Writing a low cost of other programs of the teacher.
-------
Autocad (and the CAD software in general) are much better than the old manual paper and pencil, "" drawing board "methods (been there, etc.), as a time saving, especially for highly detailed or large (buildings, cars) projects. But even with the CAO, you should always be able to transfer the necessary information have developed in the workshop to your orders - we recommend the course of a real person must be followed by an identifier for the necessity of the real world.
I have AutoCad and professionally in my humble opinion, is a bit high price under the heavy workload. Moreover, even if it is done in AutoCAD drawings, the construction company offices often require drawings in the standard "industry" formats so that you can understand the workers who are drawing with the minimum number of calls, declarations, etc.
I recommend a beginners course in Autocad in a community college in your area. In this way you can with the basics of CAD creation (and the development of standards in general) quickly, you can receive live answers to any questions a person, and you will be able to provide information on Writing a low cost of other programs of the teacher.
-------
Autocad (and the CAD software in general) are much better than the old manual paper and pencil, "" drawing board "methods (been there, etc.), as a time saving, especially for highly detailed or large (buildings, cars) projects. But even with the CAO, you should always be able to transfer the necessary information have developed in the workshop to your orders - we recommend the course of a real person must be followed by an identifier for the necessity of the real world.
I have AutoCad and professionally in my humble opinion, is a bit high price under the heavy workload. Moreover, even if it is done in AutoCAD drawings, the construction company offices often require drawings in the standard "industry" formats so that you can understand the workers who are drawing with the minimum number of calls, declarations, etc.
I recommend a beginners course in Autocad in a community college in your area. In this way you can with the basics of CAD creation (and the development of standards in general) quickly, you can receive live answers to any questions a person, and you will be able to provide information on Writing a low cost of other programs of the teacher.
-------
Autocad (and the CAD software in general) are much better than the old manual paper and pencil, "" drawing board "methods (been there, etc.), as a time saving, especially for highly detailed or large (buildings, cars) projects. But even with the CAO, you should always be able to transfer the necessary information have developed in the workshop to your orders - we recommend the course of a real person must be followed by an identifier for the necessity of the real world.
Auto-CAD program is fairly expensive at first, but the LT version. Similarly, learning can be a lot of problems. Have moved schools. If you only want to design a desktop is probably easiest. If we use for this is usually used for larger designs.
Why be limited desktop? If you have a course program that probably all sorts of ideas for design preserved. Taking the course will help to train your mind and something that you can use your CV to find work. I say go for it! You have nothing to lose and everything to gain! Happy inventing.
Auto Cad is a great system and the basic commands you must learn to use the system is relatively simple. I would recommend it. Also helps to know, Auto-Cad, if you decide to improve and use the 3D modeling systems as UG4 or CATIA.
Yes, you can for this and use the time to learn AutoCAD, this measure should not be too long. I've learned to use models of electrical engineering at a couple of days. Just keep plugging away my little ...
AutoCAD is nice, but it can be done in 2D things. If I were you, Woud I tried to find classes taught by the inventor or ideas. The 3D modeling programs are amazing. They enable the design of the object and display it in 3D, which gives the opportunity to see the object from all sides. With ideas, the voltages applied to the object and see how he reacts, which can refine your idea. Finally, 3D images in 2D perspective can be made when presenting someone. Highly recommended.
No, it is not.
Autocad, Unigraphics, and all other CAD / CAM programs are used by publishers to deliver designs that implement the created by someone else.
If you make original works embodiment of the invention, then you probably need an engineer or scientist who tells the editor to draw what.
AutoCAD is a little difficult to learn, but not impossible. I think it's best if you want to build something. In Fron Autocad is better to start a 2D drawing, and then translate them into 3D. A better and more appropriate Catia (more expensive). If you are a human invention, is the right way. Good luck!
Post a Comment